Thought this DIY looked simple enough for starters. I have made many friendship bracelets before so this isn’t a new thing for me. However, I have never seen or attempted this specific one. Below is my attempt at this friendship bracelet:
All you need is a clipboard or tape and two different colors of string.
First off, make sure the string is long because you’re going to need a lot of it. I ended up running out so there isn’t a picture of the finished bracelet.
Step 2 requires some previous experience with friendship bracelets because you are going to be making a V. Make sure you make one row of each color before continuing. If you need help with the V knot here is a link to different kinds of knots and how to do them: http://friendship-bracelets.net/tutorial.php?id=13
Step 3 gets tricky and confusing, I had to re-do this one a couple of times before figuring it out. You’re going to grab the outer most second color (red in my pictures) and tie them over the outer most first color (yellow). Do this on both sides.
Step 6 is just a normal arrow with the inner 3 strings (skip the outside strings).Step 7 is just a normal arrow using all strings. Once you’re done with all the steps you just keep repeating steps 2-6 until you run out of string or have reached a desired length. Just remember to leave room at the top and bottom so that it can be tied.
As you can see this pin works! It just takes patience and practice. Don’t be discouraged if your first one isn’t perfect, as you can tell mine wasn’t. Try it for yourself and good luck!